More Details
908703A
Fork outer tube - left
|
More Details
908704A
Fork outer tube - right
|
| |
More Details
999051
Oil tank Models 99, 01, 02, & 03
|
More Details
38900
Lever holder assembly - right side
|
| |
More Details
275095B
Model 95 tuning kit for the 28mm slip fit Mikuni
Model 95 Combat Wombat carburetor tuning kit for the slip fit 28mm Mikuni. This kit includes needle jet, jet needle, pilot and main.
|
More Details
944502
Primary gear (55t, helical)
|
| |
More Details
909524
Control shaft snap ring tool
This ia a Hatch's Hodaka reproduction: Fits Models 90, 92, 93, 94, 95, 96, 97
|
More Details
711501
Clutch side cover
Black---does not include gasket.
|
| |
More Details
923008
Ignition coil for the model 92 and 92B+ 94/94C
This is a Reproduction of a very hard item to find. It is a very close replacement to the original Hodaka Factory coil. It has a single power wire coming out of the coil. A ground wire (that can be attached to the coil mounting bolt) is included.
|
More Details
71150183
Clutch side cover
Does not include gasket
|
| |
More Details
VM2000Kit
Every day low price!! Carburetor rebuild kit for Models 90 92 92B 92B+ 96
Carburetor rebuild kit for the 20 mm Mikuni used on Models Ace 90, Ace 92, Ace 92B, Ace 92B+ and the Model 96. Includes float, float bar, throttle adjustment bar, float bowl gasket, manifold O ring, jet needle, float valve / seat plus a 10 page service manual for the Hodaka 20mm carb.
|
More Details
989524
Control shaft snap ring tool Model 98 99 01 02 03
This is a Hatch's Hodaka reproduction: CONTROL SHAFT SNAP RING TOOL Model 98 99 01 02 03: Snap ring tool for the Models 98, 99, 01, 02 and 03
|
| |
More Details
904613Assm
Control shaft assembly Models 90 92 92B 92B+ 93 94 95 96 97
Control shaft assembly for the Model Ace 90, Ace 92, Ace 92B, Ace 92B+, 93 Super Rat, 93B Super Rat, 94 Wombat, 95 Combat Wombat, 96 Dirt Squirt and the 97 Super Combat. Includes control shaft, ball receiver, springs, keeper and snap ring.
|
More Details
9497XX
C T Sprockets hardened blackloy 428 chain 6 bolt hub
Here's a few CT Sprockets, A Blast from the Past. These are Hardened Alloy, referred to as "Blackloy". Made in the U.S.A. A great nostalgic piece for your Hodaka. Very limited quantities, once they are gone, they are gone. Act fast!!!! These have been on the shelf for 40+ years, they may have a minor scratch, mark, or slight discoloration in areas.
|
